As my web-shop is not yet finished, I have listed here all products that are currently available for order. This list is currently under construction and will be extended constantly. If you cannot find a product here, please write to me.
last change: 03.09.2023
DC filter modules with an output of up to 3600VA are available:
Here is the module which can be configured up to 2000VA:
By changing the capacitor values, the power can be adjusted as desired. The surcharge for each additional 200VA is 6€.
The following module can be configured up to 3600VA:
Here, the following applies accordingly: minus 200VA equals minus 6€.
This filter was designed at the request of a customer:
Please observe the safety rules which correspond to the legal regulations in your country.
The installation of electrical systems must be carried out by a qualified electrician in accordance with the applicable electrotechnical regulations be carried out by a qualified electrician.
The following board sets are available:
Each set includes two Main boards, one ps (rectifier) board and the connecting board. A second rectifier board is possible. Add 15€, please.
Each set includes 2 Main boards, one ps (rectifier) board and the connecting board. All semiconductor are installed. Only the voltage regulators are supplied separately, if the installation of a heat sink should be necessary. A second rectifier board is possible. Add 19€, please.
Each set includes two Main boards, one ps (rectifier) board and the connecting board. All parts are installed, the two current sources and voltage drop of -4dB Jumper are correctly calculated. The supply voltages and the Quiescent current is adjusted. The boards have been extensively tested and inspected. A second rectifier board is possible. Add 48€, please.
The SAP are available as potentiometers without display or with display, here 1.5 inch RGB Oled or 2.4 inch TFT EPS. All SAPs are available as balanced (XLR) or unbalanced (Cinch) versions. The potentiometers can be supplied with the Muses chip 72320 or 72323. or 72323. The basic price always refers to the Muses 72320 chip.
The corresponding power supply unit is always included. The power supply unit for the balanced Oled version contains a more powerful transformer (2 x 107mA).
Each Muses board contains a Muses chip that can control either two RCA channels (unbalanced) or one XLR channel (balanced). This means that two Muses boards are needed for one XLR stereo pot.
Each set is constructed in such a way that it can be put into operation without further purchases. Included are:
The boards are cascadable. A multi-channel poti is only limited by the power of the power supply. A 20-channel version has already been realised by me.
In the download section you will find a PDF file with a summary of all Muses units. Here there are also some explanations about the upgrades and the differences between the two Muses chips.
Currently, only the unbalanced version (cinch) is available:
Finished units of the DC and mains filter category with one to six sockets are available.
XOno Clone phono preamplifiers are available in MM or MC versions with or without XLR output..
Pictures will follow in the next few days.